Computer cooling system, pc water cooling, computer liquid cooling, watercooling systems

what is the best computer cooling system, it is really hard to tell, someone say air cooling is enough, but others want to try water cooling pc, and some geeks use Liquid nitrogen

but I have to say, computer watercooling system has become a practice largely associated system, with those overclocking in the form of either manufactured "kits" or in the form of DIY setups assembled from individually gathered parts.

Now watercooling has seen increasing use in pre-assembled desktop computers / PCs. Water cooling system, can extract more heat from the cooled parts, such as cpu, vga card , that makes it suitable for overclocking, and opposed to air cooling it is less influenced by the ambient temperature.

An advantage is that a water cooling system is not limited to one component, so it can cool the CPU, GPU and other components at the same time. Another advantage to water cooling is the low noise-level output it provides when compared to that of fan cooling, which can become loud especially when using a higher clock rate processor.

PC water cooling system has its own disadvantages : the potential for a coolant / water leak, which can damage electronic components.

CPU liquid Cooling, Liquid CPU cooler, CPU waterblock in liquid cooling system

What is cpu liquid cooling, here is a basic concept

CPU speeds have been increasing at a dramatic rate in the past few years, for generating the new speeds, CPUs have a lot of transistors, are drawing more power and have higher clock rates. that leads to greater heat produced by the CPU in the computer. CPU heat sinks become a problem, air cooling is not enough, so it comes liquid cooling, most use water, we called it cpu liquid cooling or cpu water cooling.

Just like a radiator for a car, a liquid cooling system circulates a liquid through a heat sink attached to the processor inside the pc. As the liquid passes through the heat sink, heat is transferred from the hot processor to water. The hot water/liquid then moves out to a radiator and transfers the heat to the ambient air outside of the case. The cooled liquid then travels back through the system to the CPU to continue the process.

XSPC has developed its liquid cpu cooler - Delta v3, it can be used for most CPUs, Intel or AMD , dual or quad cores, no problem

watercooling pc setup, home made liquid cooled pc setup, assemble your watercooling pc system

Think Before you do it

Nowadays, watercooling setup is not a difficult job for overclock players, but we stronely recommand u to think about every single step before assembling a water cooling pc system.

First come with the water blocks. such as cpu waterblock, or vga waterblock, they are hunk of thermally conductive metal (most of them are copper , some crazy people use sivler , ) which interfaces with the chip being cooled.

Different water block manufacturers use different water block designs; but their basic goal is to create max. surface area inside the block for heat to transfer from the metal to the water. Therefore, water blocks are filled with a maze of channels designed to maximize surface area and create turbulence in the water, which will help avoid spots? Water blocks can be used on the CPU, GPU/VGA, Harddrive, Memories, and Northbridge; but you should know a water cooling system does not need to cool all those components.

Next, the questionis the radiator and what fans will be used to cool , A great choice for a radiator is xspc radiators , they are excellent performers and very inexpensive.

Radiator cooling is usually accomplished via 120mm fans blowing through the radiator. This is because 120mm fans have the best airflow to noise ratio. Using a large 120mm fan and radiator will also allow the water to come in contact with more surface area of the radiator. sometimes a fan shround can help.

After the water has been cooled by the radiator, it will returned to a reservoir (or res. for short ). A water cooling reservoir should be used in a water cooling system, There are many advantages to using a reservoir. Reservoirs are not mandatory, but are useful in that they increase the fluid capacity, and therefore the thermal capacity, of the system. They also allow for convenient filling and bleeding (removing excess air) of the system.

To move water through the system, a water cooling pump must be used. Many water cooling setups use submerged pumps which sit inside the reservoir. Generally speaking, a pump with 100-300 g/h should be sufficient;

here you can use xspc reservoir pump combo, or use a bigger dual bay reservoir pump combo,

this pump is just powerful enough to move water through the system If the water moves too slowly, it will not be able to effectively whisk heat away from the chip. If the water moves too quickly, it will not have adequate time to soak up the heat from the water block

Home made watercooling pc, home made liquid cooled pc system

TO modify your pc system, using a water cooling system to cool your pc, dell or hp will not help u to do that, you have to do it yourself, in another word, a homemade watercooling pc is what u want

well , i guess u need you need the following Basic device

1. CPU or VGA waterbock
2. Radiator, passive or
3. reservoir
4. pump
5. accessories (tube, screw, thermal pad etc )

A cpu / vga waterblock helps you to cool your cpu or graphic cards , pump and reservoir helps flow the water , and radiator is the final step, remove heat from your pc.

sure u still can water cool your vga card, northbridge with watercooling or liquid cooling system !

but nowadays, u dont have to make everything yourself, just buy a simple basic xspc water cooling kit and follow the instructions

a basic xspc set of water cooling kit Contents :

• Delta V3 Universal CPU waterblock
• 12V Pump/Reservoir Combo
• High Performance Copper Fin Radiator R120
• 80mm to 120mm Radiator brackets
• Low Noise 1700rpm 120mm Fan
• 120mm Fan Grill
• Clear 10/8mm Tubing
• Anti-Corrosive Water Additive
• Thermal Paste
• Users manual

DIY Water Cooling , DIY liquid cooling, Diy PC watercooling system

Nowadays, watercooling setup is not a difficult job for overclock players, but we stronely recommand u to think about every single step before assembling a water cooling pc system.

A cpu waterblock helps you to cool your cpu , pump and reservoir helps flow the water , and radiator is get away the heat

some times u dont need a fan if u have a passive radiator

sure u still can water cool your vga card, northbridge with watercooling or liquid cooling system

a xspc set of water cooling kit Contents :

• Delta V3 Universal CPU waterblock
• 12V Pump/Reservoir Combo
• High Performance Copper Fin Radiator R120
• 80mm to 120mm Radiator brackets
• Low Noise 1700rpm 120mm Fan
• 120mm Fan Grill
• Clear 10/8mm Tubing
• Anti-Corrosive Water Additive
• Thermal Paste
• Users manual